Audiolab 6000A Integrated Stereo Amplifier with Bluetooth – Black

• Black
• Integrated Stereo Amplifier
• 50W Per Channel Into 8ohm Speakers
  • 75W Per Channel Into 4 Ohm Speakers
• Incorporates High-Quality Digital To Analogue Conversion, Enabling Digital Sources To Be Connected Directly Without An External DAC
  • ES9018 Sabre32 Reference Chip, Utilising ESS Technology’s 32-Bit HyperStream Architecture & Time Domain Jitter Eliminator To Deliver Ultra-Low Noise & High Dynamic Range
  • Choice Of 3 Digital Filters
    • Fast
      • Standard Response with Fast Frequency Roll Off Above FS/2
    • Slow
      • Starts Rolling Off At A Lower Frequency Than The Fast Filter But Has A More Gentle Rate Of Attenuation
    • Phase
      • Has A Gentle Attenuation Slope Similar To The Slow Filter But With Minimum Phase Characteristics. It Can Be Likened To An Analogue Filter Applied In The Digital Domain
• Discrete Class AB Power Amp Circuits Uses A CFB (Complementary Feedback) Topology, Ensuring Superior Linearity & Excellent Thermal Stability, As The Idle Current Is Kept Independent Of The Temperature Of The Output Transistors
  • A Substantial 200VA Toroidal Transformer, Followed By 4x15000uF Reservoir Capacity (60000uF In Total), Helps The Amplifier To Maintain Firm Control Of The Music Whilst Enabling Excellent Dynamic Range
• The Pre Amp Section Is Kept As Simple As Possible To Maintain Signal Purity, With Line Input Signals Passing To A Precision Analogue Volume Stage
  • The Latter Covers The Range From -80dB to +8dB In Steps Of 2dB & 1dB (Step Resolution Increases With Volume Position)
  • Much Effort Has Gone Into The Physical Layout Of The 6000A’s Circuitry, Protecting The Preamp Section From Noise Interference
  • This, Plus The Use Of Independent Low-Noise Power Supplies For Critical Stages, Helps To Deliver A Performance That Rivals Significantly More Expensive Analogue Amplifiers, Even Before Taking The 6000A’s Impressive Digital Circuitry Into Account.
• Rotary Controls & Large, Central OLED Display
  • 6000A Bears A Strong Resemblance To The Audiolab 8300A
• Connections;
  • Phono MM Input
    • High-Quality, Low-Noise, JFET-Based Circuit With Precise RIAA Equalisation
  • 2 x Digital Optical Inputs
  • 2 x Digital Coaxial Inputs
  • Bluetooth Input
  • 3 x Stereo RCA Inputs
  • 1 x Power In RCA Inputs
    • Use Audiolab 6000A As A 2-Channel Power Amplifier For A Surround Sound Set-Up or As A Power Amplifier For A Dedication Pre-Amplifier
  • 1 x Pre Out RCA Outputs
    • Use Audiolab 6000A As A Pre-Amplifier For A Dedicated Power Amplifier
  • 6.35mm Headphone Output
    • Dedicated Integrated Headphone Amplifier with Current-Feedback Circuitry
• IEC Mains Input
• Remote Control Included
• Height: 80mm, Width: 445mm, Depth: 330mm
• Weight: 7.8Kg

Reserve Now