Pro-Ject The Classic EVO-E Turntable with Electronic Speed Control – Eucalyptus

• Eucalyptus Veneer Finish
• Utilises A Simple & Elegant ‘Frame’ Design, Which Bears A Notable Resemblance To Some Of The Most Famous Turntables Of The 1950’s, 60’s & 70’s
  • Design Is More Than Just Aesthetically Pleasing, It Also Combines Proven Hi-Fi Technologies With The ‘Simple To Set-Up & Own’ Principles Associated With Pro-Ject Turntables
• Electronic Speed Control with 33 & 45 RPM Playback Speeds
  • Simple Speed Control Switch Is Mounted On The Top Surface Of The Inner Plinth
• Ortofon Quintet Red MC Cartridge Pre-Installed
• 9″ One-Piece The Classic Tonearm with Carbon Fibre/Aluminium Construction & Evolution Bearings
  • Conical Tonearm Is Made From Aluminium, Wrapped In Carbon Fibre – Creating A Tube That’s Both Light & Very Stiff, With Excellent Resistance To Unwanted Vibrations & Interferance
  • The Tonearm Tube Is Mounted Into A Superior Bearing Housing, Which Uses A High-Mass Black To Draw Vibrations Away From The Signal Wires
  • The Striking Nickel-Finished Counterweight Is Also TPE Dampe, Reducing The Amplitude Of The Tonearm’s Resonant-Frequency By 50%
  • Finally, The Tonearm Benefits From The Usual Azimuth & VTA Adjustments Associated With All High-End Pro-Ject Tonearms
• Improved Two-Plinth Design Utilises Thermo Plastic Elastomers (TPE) To Isolate The Metal Finished Inner-Chassis, Rather Than The Traditional Method Of A Spring-Loaded Sub-Chassis
  • This Construction Still Effectively Decouples The Motor From The Main Bearing & The Tonearm, Reducing Unwanted Interference Between The Components
• The Idea Of Reduced Resonance Transference Carries Through To The Platter Configuration
  • The Heavy Main Platter Is Machined From A Special Aluminium Alloy, Which Is Lined With TPE Damping, While The New Sub-Platter Is Diamond-Cut From The Same Metal For Absolute Accuracy & Reliability In Production
  • This New System Adds Greater Mass Over Previous The Classic Designs, & Works To Far Finer Tolerances
  • When Mounted In The Steel/Bronze Main Bearing With Teflon Lining, The End Result Is An Ultra-Silent, Stable Playback Platform with Minimal Bearing Noise
• Platter System Is Belt Driven By A Premium AC Drive Motor, Which Is Powered By A DC/AC Generator Board For Minimal Noise & Interference From Unclean Power Supplies
• Set Of Height-Adjustable Dampened Feet
• Supplied With;
  • Pro-Ject Connect-IT E RCA Cable
  • Removable Dust Cover
• Height (Lid Closed): 131mm, Width: 462mm, Depth (Lid Closed): 351mm
• Weight: 10.5Kg

Reserve Now